공지사항

Double Glazing Door Locks

Many homeowners opt for double-glazed windows and doors for their energy efficiency, insulation, and sound reduction. However, they can also be an effective deterrent against burglars.

Check that your double-glazed windows have anti jemmy hinges to enhance their security. These special hardware components make it difficult to pry the window sashes off.

Multi-point locking

Multipoint door locks are one of the most effective security tools you can install at your workplace or in your home. They are almost impossible to break or pick and are an excellent complement to any security system. They can also increase the efficiency of your energy by reducing drafts and enhancing the seal around the conservatory door locks frame.

Multi-point locking systems are composed of a deadbolt, a live bolt, and hook bolts above and beneath the latch. They also have flush bolts that lock into the door's head and the sill. They usually extend across the entire width of the door if not more. In commercial settings, they are referred to as "full-width" systems due to the fact that they are able to secure the entire opening.

Multi-point locking is available on the majority of replacement upvc door locks and certain timber doors. This kind of lock offers a higher level of security when compared to standard locks. It is often mentioned as part of the Secured by Design initiative, that has been approved by the police.

When a multi-point lock made of uPVC door is shut and the outside handle is turned on, it activates the latch bolt. The inside handle is locked by turning the thumbturn lock on the inside with the door handle raised or by using the key. Always make use of a key when you lock your door. Using handles to lock the door could cause damage to the latch or deadbolt.

If your upvc door locks multi-point lock isn't functioning correctly, conservatory door locks it could be because it's not aligned with the door frame. You can test this by placing a spirit-level on top of the doors, and then looking for gaps in the miter joints.

It is worth asking your double glazing specialist whether there's a gap and how to fix it. They can either replace the lock or install a new one. They'll be able to tell whether it's due to damage to the frame or the lock unit. In these cases the technician can repair or replace door lock the multipoint lock to restore it's functionality.

Espagnolette locks

Espagnolette locks are one of the most popular window locking mechanisms for modern uPVC double-glazed windows. They are easily recognised by their flat strip design which moves as you turn the handle. They work in tandem with the secure multi-point locks that are positioned around the frame to securely lock and release your windows. If you want to upgrade your uPVC window handles, espagnolette handles are utilized for new constructions or renovations. They are available in a broad range of styles, including contemporary and period. They also offer a wide variety of bar sizes and backset options, as well as mushrooms cam heights, and a choice of profiles to fit every application.

The espagnolette lock is a popular choice but has been criticized for providing an inadequate level of security for French doors. A single lock point in the middle of the door is easily bypassed. In addition, it is quite easy for burglars to open your French doors by bending the handle to either the left or right. These doors are usually the main entrances to your home, and they should be secured to minimize the chance of intrusion from outside.

The espagnolette lock is not an actual bolt, but rather it is a single-piece mechanism that can be fitted externally on the edge of French doors, or internally to a casement frame. The mechanism is operated by the help of a handle. It is made up of a rod with hooks at its head and sill. The hooks are inserted into sockets in the window frame. When the handle is turned, the rod is moved upwards and downwards, and the hooks lock into their receivers, allowing them to lock and unlock your windows.

They are a great solution for those who wish to improve the security of French doors without compromising on the design and aesthetics of the door. These handles can be used in different designs and can be master-keyed for added security.

Similar to cockspur handles espagnolette handles are available in both cranked and inline versions to suit the orientation of your window. Inline versions turn in the same direction as the original. Cranked versions come in right-handed and left-handed options.

Laminated glass

Laminated glass is commonly used for windows since it is extremely hard to break. It is also much safer than normal glass because it fuses together into one single piece of safety glass, rather than breaking into sharp, loose shreds. This makes it perfect for homes as well as commercial properties.

Lamination is a process that involves the joining of two pieces of glass with a plastic layer in between. The entire piece is heated and press-pressed to create a strong enough to use as windows or doors. The laminated glass created is five times stronger and 100 times more stiff than tempered. It can also be able to withstand more severe impacts and withstand weathering.

This kind of glass is ideal for construction sites that require high performance for safety, such as increased security (impact resistant glass) UV protection or noise reduction. Laminated glass is able to be combined with high-performance coatings to improve the thermal insulation as well as solar control. It is available in a variety of options to fit your project and budget.

Unlike tempered glass, laminated glass can be cut after production and remain safe to use. It is less likely to break if it's cut from the sides of the glass rather than the edge. This makes it a good option for glass that does not open or close, like cellar windows.

It is also utilized in high-rise buildings in urban areas because of its ability to reduce the volume of noise that is transmitted from the street to the interior. The Saflex PVB layer within the laminated glasses is also able to block harmful sun ultraviolet radiation. This helps prevent discoloration of fabrics, furniture and other items.

Although laminated glass is more expensive than tempered glass, it comes with many advantages that can save you money over time. It's also more robust, resistant to abrasion and scratches, and can be made to your exact specifications. It is also less susceptible to heat damage, which makes it an ideal option for coastal areas or high-rise buildings. Some building codes even require that exterior doors and certain windows inside are made of laminated glass.

Friction hinges

Friction hinges are used to support and keep doors, flaps and panels. They can also impede other hinges' movement and prevent hard slamming and accidental opening and closing. They come in a variety of sizes and shapes, and they are able to have a variety of torques. These forces determine the length of time that hinges remain open or shut.

Aluminum is a great material for friction hinges due to its high strength-to-weight ratio as well as its durability and resistance to corrosion. It is lightweight and easy-to-handle. It can also be crafted into a wide variety of finishes, and is easy to set up and repair. Brass is another material widely used for friction hinges. Brass is an alloy of copper and zinc which is naturally resistant to corrosion. It is also stronger and more durable than steel, but it is more expensive.

The friction hinges used in uPVC door systems with double glazing are able to be customized depending on the purpose for which they are intended. These modifications can include the amount of damping, the lubricant viscosity as well as the amount of space tolerance between components, and the environmental conditions where the hinge will be utilized. These factors can affect the dynamic torque of hinges. It is important to be aware of the metric when in critical applications.

There are a variety of friction hinges including detent and one-way. One-way friction hinges provide constant torque in one direction, while detent friction hinges have no torque in the opposite direction. Other variations include disc, pipe, and curl friction. Each type of hinge is unique and comes with its own set of properties, which make it more or less useful for certain applications.

Friction hinges are also referred to as hinges with a free-stop since they permit a door or lid to remain at an angle even after the force has been removed. This helps prevent injuries through accidental closing. This type of hinge is ideal for use in tough, medical or hazardous areas. The hinges can be made to provide different degrees of free play, and they can be designed to function in different angles.