공지사항

Protect Your Pride And Joy With The Ghost Immobiliser

Guard your precious possessions against theft with the Ghost Immobiliser. It is discreet and doesn't require additional key fobs.

The device utilizes buttons on your vehicle (steering wheels doors, door panels, and the centre console) to generate a unique pin sequence that can be changed up to 20 times. This then authorizes the vehicle to start.

Simple PIN code change process

Many owners are upgrading their security because of the rising number of vehicle thefts. There are a myriad of security products that are available, from tracking systems to immobilisers and alarms. However they do not all are equally efficient in protecting your vehicle. While a tracking device can assist in finding your car in the case of theft, it will not stop the crime from occurring in the first instance. An immobiliser, on the contrary is exactly what is a ghost immobiliser says on the tin: it shuts down the engine of your car to prevent it from being started. The Autowatch Ghost is one of the most advanced options available, making it almost impossible for thieves steal your car.

The ghost device uses the buttons on your car to generate a unique sequence that must be entered to allow the engine to begin. This can be accomplished using the indicator stalk, window or heater buttons. There is also a mobile application that can be used as an emergency PIN override, which allows the driver to operate their car without having to use the button sequence. This is a great option if you want to give your car to valet parking or maintenance. The immobiliser will stay active.

The Ghost is an innovative and unique device that works with the buttons of your vehicle instead of as a separate unit. This means that it's not just a highly effective deterrent against vehicle theft but also a transferable device to any future vehicles you may own, making it more valuable than a traditional steering wheel lock.

Small device that is weatherproof

The autowatch ghost immobiliser fitting ghost immobiliser is an advanced security system that protects your pride and joy against key cloning, hacking and ECU swapping. It is a weatherproof tiny device that connects directly to your vehicle's ECU via the CAN data bus, which disables the engine. It can be plugged into the vehicle without the need for additional wiring and has been extensively tested to ensure that it is compatible with all vehicles. It is also resistant against jamming devices which are a typical method used by car thieves to bypass immobilisers.

The benefit of CAN data over conventional systems is that they operate silently. It cannot be detected using sophisticated RF scanning and code-grabbing techniques as well as detected by traditional diagnostic tools. The Autowatch Ghost does not use LED indicators, but instead uses buttons in your vehicle, like the steering wheel, centre console or doors, to create an unique sequence of disarming. This sequence can be extended 20 or more presses for additional security. The iPhone app allows only one connection, with an individual pairing code for the Ghost. All communication between the two devices is secured.

The Ghost also stops car thieves from using the key to a new car or replacing the ECU to bypass the immobiliser to start the engine. It will only allow the engine to start when the correct PIN code is entered. It is also possible to put it into Valet/Service mode for temporary operation (with specified parameters, such as a 30mph speed limit) to allow you to transfer your vehicle to a valet service or to be serviced without needing to enter a PIN.

Tested for each vehicle

The Autowatch Ghost is the world's first aftermarket immobiliser for CAN bus that connects to your vehicle's existing wiring and connects to your engine control unit (ECU). The device is able to intercept signals and prevent your car from starting normally until you enter a specific code. The system can be activated or deactivated using your own smartphone application without the need for wires.

Standard factory immobilisers on vehicles function by using a transponder built into the key, which sends a signal to the ECU. If the correct code is sent the car will start however if the transponder is swapped with one from another vehicle the immobiliser won't recognize it. This makes it possible for the vehicle to be stolen and then started. The Ghost immobiliser has been developed by a South African company at the forefront of vehicle security systems technology. It protects you from hacking or key cloning, and even key theft. Only by physically towing your car away from thieves could they steal it and not be able drive it.

Ghost uses the buttons in your vehicle, including the indicator stalk, steering wheel and door panels to create an individual, changeable PIN code sequence that must be entered before you are able to use your car. This is done without extra hardware, such as a keyfob. It can take up 20 to 20 presses. It is also undetectable by equipment for diagnostics and does transmit radio frequency signals, which means thieves are not able to use sophisticated RF scanners or code grabbing technologies to detect that the system has been set up.

Ghost is more difficult to remove than car alarms that require disarming using several buttons. This makes it a great supplement to a GPS tracker, which can help locate your car after it's been stolen.

Emergency PIN code override

You don't have to look far on social media for stories or videos about cars that have been stolen using the most advanced technology tools. This includes key-cloning and hacking tools that allow them to start your vehicle without the original key fobs.

Our ghost immobiliser near me (just click the following post) immobiliser combats this and gives you an additional layer of protection to stop your vehicle from being stolen when it is targeted by thieves. It generates an individual pin code by pressing the buttons on your steering wheel, ghost Immobiliser Near Me door panel and on the centre console. This unique PIN is entered in conjunction with your original key fob in order to stop the engine from getting started. The unique override pin is on the black card that you will receive following installation and is easy to remember as there aren't any LEDs.

The device is hidden inside the vehicle's wires and doesn't emit any radio signals, so it isn't able to be identified by modern criminals using diagnostic software that is able to recognise what type of security system you have installed. This makes it a fantastic alternative to a tracker.

Unlike other security systems, which rely on a relay in the engine bay, these immobilisers CANBUS communicate through CAN databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to shut down a vehicle completely by sending a digital block to the ECU and engine.

It is also possible to connect an analogue immobiliser, alarm or tracker to these systems but this must be stated prior to the installation of the device. They also work with service/valet modes and an excellent alternative to a tracking device if you take your car into the dealer to address an electrical problem.

Service/Valet mode

In recent years, there has been a increase in vehicles stolen without the owner's keys. With easy access to key cloning equipment & door lock pick sets it is now much easier for thieves to take your prized possessions. To stop this, we have launched the Autowatch Ghost immobiliser that prevents your car from being driven despite the fact that your keys have been copied or your vehicle has been hijacked.

It directly communicates with your car's ECU (Engine Control Unit) via the data loop of CAN. It is completely silent as it does not use radio frequencies or key fobs. It can't be detected by diagnostics or any other hacking device. It also shields against the possibility of adding the key to a new one or replacing the ECU to bypass the system since only the correct PIN code can allow the engine to start.

The device is hidden inside your car and is reached via the buttons on your steering wheel, center console, and door panels. A unique & changeable PIN code sequence of up to 20 digits must be entered before you can start your car.

This is the first aftermarket immobiliser for CAN bus to be designed to stop your car from being moved away or even started without a PIN code being entered prior to. If you're driving away with the device in motion it will display an indicator on your dashboard which will flash continuously for approximately 300m. Entering your PIN code will turn off the anti-hijack. Your vehicle will continue to operate just as normal. If you do not enter your PIN at this point, the warning will continue to flash and require a new PIN code for every attempt to start your car.