공지사항

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy from theft by using the Ghost Immobiliser. This system is discrete and does not require any additional key fobs to operate.

The device utilizes buttons in your vehicle (steering wheel doors, door panels and centre console) to create a unique pin code sequence that can be up to 20 presses. This allows your vehicle to start.

Simple PIN code change process

With the increasing rate of vehicle theft, a lot of owners are looking to upgrade their security. There are many kinds of aftermarket security devices that range from tracking systems to alarms and immobilisers. However, not all of them are equally effective in protecting your car. A tracking system may assist you in locating your vehicle if it's stolen, but it will not stop the crime. Immobilisers, on the other hand, does exactly what it says on the tin: it disables the engine of your vehicle so that it is unable to be started. The Autowatch ghost immobiliser installation, linked internet page, is one of the most advanced options available, making it nearly impossible for thieves steal your vehicle.

By using the buttons that are already present in your car The ghost device is able to create a unique sequence which must be entered before the engine will start. This can be accomplished using the indicator stalk windows or heater buttons. There is also a mobile application that can be used as an emergency PIN override, allowing the driver to operate their vehicle without the button sequence. This is a great option if you want to give your car to valet parking or maintenance. The immobiliser will stay active.

The Ghost is an innovative and unique device that works with the buttons on your vehicle rather than as a separate unit. This means it's not just a highly effective protection against theft of your vehicle, but also a transferable device onto any other vehicles you own, making it more of an investment than a traditional steering wheel lock.

Weatherproof, tiny device

The Autowatch ghost immobiliser 2 immobiliser is a sophisticated security device that protects your car from key cloning, hacking & ECU swapping. It's a weatherproof and small device that communicates directly with your vehicle's ECU over the CAN data bus to disable the engine. It can be installed in the vehicle without the need for additional wiring, and has been thoroughly tested to ensure it works with all vehicles. It is also resistant against jamming devices that are a popular technique that car thieves use to get around immobilisers.

The benefit of using CAN data is that it operates in a silent manner in comparison to conventional systems. It isn't detected by sophisticated RF scanning or code-grabbing technology and is likewise unreadable by traditional diagnostic tools. The Autowatch ghost does not produce LED indicators and instead uses the buttons in your vehicle such as steering wheel or centre console panels to create a unique, customizable disarm sequence. You can make this sequence as long as 20 presses for added security. The iPhone app lets you make only one, authenticated connection with a pairing code that is unique to the Ghost and the communication between the two is encrypted.

The Ghost prevents car thieves adding a new ignition key or replacing the ECU in order to bypass the immobiliser. It will only allow the engine to start only if the correct pin code is entered. It is also possible to put it into valet/service mode for a temporary operation (with set parameters such as 30mph speed limit) so that you can give your car to a valet service or to be serviced without needing to enter a PIN code.

Tested for each vehicle

The Autowatch Ghost is the first aftermarket CANbus immobiliser. It can be connected to the wiring of your vehicle and also to the engine control unit (ECU). The device intercepts signals to stop your car from operating normally until you enter a custom code. The system can be activated or deactivated by using your smartphone's app without the need for wires.

The standard factory immobilisers function with a transponder which is embedded in the key. This transmits a signal to the ECU. The car will begin to start if the correct code is transmitted. If, however, the transponder from another vehicle is used instead, the immobiliser doesn't recognise it. This makes it possible for the vehicle to be started and stolen. A South African company that is at the forefront of car security systems technology has developed the ghost immobiliser fitting immobiliser. It guards you against key cloning or hacking, and Ghost immobiliser installation even key theft. The only way a thief could steal your car is physically towing it away and even then, they wouldn't be able to drive it.

Ghost uses buttons on your vehicle, like the indicator stalk, steering wheel, and the door panels, to create a unique PIN code that must be entered in order to use your car. This is done without the need for additional hardware like a key-fob and can be up to 20 presses long. It is also unrecognizable by diagnostic equipment and does transmit radio frequency signals, so thieves cannot use sophisticated RF scanners or code grabbing technologies to detect that an installation has been made.

Unlike physical anti-theft devices like wheel locks or clamps, Ghost is concealed within the vehicle so it can't be taken away or disabled by thieves. It's even more difficult to get rid of than a car alarm, which requires disarming with a button sequence. This makes it an excellent supplement to a GPS tracker which helps locate your car after it has been stolen.

Emergency PIN code override

You do not have to look far on social media to find stories or videos of cars that have been stolen using the latest technology tools. This includes key-cloning devices and hacking devices that allow the vehicle to start without the original key fobs.

Our Ghost immobiliser is designed to stop this, and give you an extra layer of security to prevent your vehicle from being targeted by thieves. It works by creating a unique pin code push sequence using the buttons you have on the steering wheel, door panel and the center console. This unique PIN is entered along with your original key fob in order to stop the engine from beginning. The unique PIN for override is on the black card that you will receive after installation. It's easy to remember as there are no LED indicators.

The device is hidden in the wiring of the vehicle and doesn't emit radio signals. This means it can't be detected using diagnostic software which can identify what type of security systems you have installed. This makes it a fantastic alternative to the tracker.

Contrary to most security systems that use a relay inside the engine bay these CANBUS Immobilisers communicate with the vehicle's ECU and BCM via CAN data bus (brand ghost immobiliser installation dependent). This enables them to shut down the vehicle completely with a digital block of commands that is sent to both the ECU and the engine.

It is also possible to connect an analog immobiliser, alarm, or tracker with these systems, but this has to be specified prior to installing the device. They are also compatible with service/valet modes and is a great alternative to a tracker device when you take your car into the dealer for an electrical issue.

Service/Valet Mode

In recent times, there has been an increase in vehicles being stolen from owners without keys. With easy access to key cloning equipment & door lock pick sets it is now much easier for thieves to take your prized possessions. To combat this we are now offering the Autowatch Ghost immobiliser that prevents your vehicle from being driven despite the fact that your keys have been copied or your vehicle has been stolen.

It connects directly to your car's ECU (Engine Control Unit) via the CAN data circuit. It's completely silent as it doesn't use radio frequency or keys fobs. It isn't detected by diagnostics or any other hacking device. It also protects you from introducing the new ECU or key to bypass the system because only the PIN number allows the engine to be started.

The device is concealed inside your car by using buttons on the steering wheel, the centre console and door panels. Before you can begin your car, you need to enter a unique, changeable PIN code up to 20 numbers.

This is the very first aftermarket CAN-bus immobiliser that was developed. It can prevent your vehicle from being driven or started in the event that you do not enter a PIN code before entering. If the device is armed and you attempt to drive off it will display an indicator on your dash, which will flash continuously for about 300m. If you type in your PIN code at this point it will disarm the anti-hijack and your car will continue to operate as normal. If you do not enter your PIN in this moment, the indicator will continue to flash and require a new pin code every time you attempt to start your car.