공지사항

Ghost Immobiliser Installation

Guard your precious possessions from car thieves by adding a ghost immobiliser. Our TASSA-certified system is safe from key cloning, hacking, and vehicle immobiliser bypass.

The system is hidden within the wiring loom of your vehicle making it totally invisible to anyone who sees it. It operates by creating pin code push sequences by using existing buttons on the steering wheel, door cards and the centre console.

No circuit cuts

It's not a surprise that people are concerned about protecting the vehicle they have spent so much money to purchase. However, traditional security systems such as wheel locks and alarms can easily be snatched away or bypassed by thieves. Ghost immobilisers are extremely effective solution that works in a quiet manner and isn't identified by modern thieves.

A ghost immobiliser, also known as a hidden device is a device that communicates with your vehicle's data network CAN to disable the engine. It does this without key fobs or radio frequencies. It communicates with your vehicle's ECU through existing buttons on the steering wheel, dash, and door panels, to create an unique pin code that only you can access. The code can be altered at any time and can contain up to 20 numbers based on your preference. It also includes a secure emergency code you can use should you forget your PIN.

The ghost immobiliser can be used to stop relay boxes from transferring your car key's signal from within your home, which could unlock the doors and then start the vehicle. It could also block the latest techniques of stealing your vehicle such as OBD port hacking. The device is small and weatherproof, which means it's difficult to see and is also difficult to alter with.

Another benefit of the ghost immobiliser is that it can be installed inside your car without permanent marks. It's ideal for those who are planning to sell their car in the near future. It's also more efficient and less time-consuming to install than a factory-fitted system.

The Autowatch Ghost, a cutting-edge new generation device, stops thefts of cars using contactless technology by connecting to the CAN network of a vehicle and using the buttons to generate an unique PIN code. This is a stealthy system that can be installed without cutting any wires and does not require any additional key fobs. It can also be connected to the original ECU of the vehicle, which prevents thieves from bypassing it with a new key. This system has been TASSA-verified and can be linked with an International Security Register. Owners will have peace of mind knowing that their vehicle is secured from theft.

No scanning with RF

If you've invested a lot of time and money in the customization of your vehicle, you'll need to secure it from theft. Installing an immobiliser is among the best ways to prevent theft. It will prevent your vehicle from starting until you enter a unique code. Utilizing the buttons on your steering wheel as well as the dashboard, you can generate a PIN up to 20 digits long which is only known by you, and ensure that only you are able to drive your vehicle. It is also possible to set up a service and valet mode that will allow you to start your car temporarily without entering the PIN code. This will allow technicians to work on your vehicle without being present. This is an excellent option for those who want to cut down on time and make their life easier.

Ghost immobilisers, which are new generation device connects to the CAN data network of your vehicle and uses the buttons located on the dashboard and steering wheel to set a PIN number. It is designed to be stealthy, with no LED indicator or noise to make it obvious and can be installed anywhere on the vehicle, without affecting the appearance of your beloved vehicle.

This stealthy system has been approved by TASSA and can reduce the cost of ghost immobiliser - gammelgaard-pope-3.blogbright.net - of insurance. It comes with a tracking feature that can locate your vehicle even if it's gone missing. This is a great feature if you own a rare expensive car that you've put time and effort to customize.

The Autowatch Ghost can be used in conjunction with an iPhone app to enable you to remotely start your vehicle in the event that you have forgotten your PIN or are not able to access the vehicle due to a reason. This feature is ideal for those who need to go on errands or pick up your kids and do not want to let someone else drive your car. It is also helpful when you have to take your vehicle to a mechanic for maintenance or repair.

The Ghost is unique in that it does not transmit or detect radio frequencies which means it's not detected by thieves who use RF scanning and Cost of Ghost Immobiliser code grabbing technology. It can also protect your vehicle from key copying, ECU swapping and other usual methods of car theft.

No key to cloning

auto ghost immobiliser immobilisers are a fantastic option for protecting high-end automobiles and are designed to prevent key cloning. They stop your vehicle from starting unless a PIN code is entered in conjunction with the standard key fob. This makes it difficult for thieves to steal your vehicle, and could discourage them from trying. This is a good idea in the event that your vehicle has been extensively modified or is an uncommon model.

The immobilisers are connected to the vehicle's onboard CAN data network and are completely hidden, which means there is no indication of its presence inside the vehicle. The device is also difficult to detect using radio frequency scanning technology or code grabbing. This means that a burglar will have to spend longer in order to take your vehicle.

To bypass the system, thieves must be aware of the unique pin code and the location of the Ghost. The pin code is exclusive to you and you can change it as many times as you want. The pin code you choose is easy to remember, but mathematically impossible for anyone else to understand. In addition the engineer will provide you with an emergency PIN code to override if you forget the pin.

The Ghost CAN Bus immobiliser could be easily installed anywhere on your vehicle. It is compatible with any vehicle and can be fully customized to match your car's style. It is also easy to use and affordable. You can even transfer the device to a different vehicle if you switch vehicles in the course of ownership, provided that the new vehicle is compatible with the.

The CAN bus is compatible with other security features. For instance, it could detect the damage to your vehicle and warn the owner. It could also shut down the engine in the event that the vehicle has been tampered with. The system can protect your vehicle from hacking and key duplication. It also detects vibrations and contact with the vehicle. In addition, it can warn the owner if the vehicle has been moved.

No OBD port hacking

Ghost is a hidden device that is connected to the CAN data network of your vehicle. This will stop thieves from hacking in to disable your alarm, disable your key fob and make new keys. This technology is a step up over the old methods employed by thieves to steal vehicles in the past. The CAN data network also means that your system won't be affected when you disconnect or change your battery.

The Autowatch Ghost, the first non-detectable immobiliser for CAN bus aftermarkets in the world, guards against key-cloning, hacking and replica car theft. It does not use LED indicators or key fobs, instead using the buttons in your steering wheel or centre console, as well as the door panels to let you create a unique PIN sequence (up to 20 button presses) that needs to be entered prior to when you can drive your vehicle away.

Modern thieves can use diagnostics to detect circuit breaks in your vehicle. They can bypass immobilisers that require a large amount of wiring or are integrated in the wiring. The ghost immobiliser for sale is weatherproof and does not require any additional wiring. It is not identified by diagnostic tools that are professional. It can be put in on vehicles equipped with anti-theft systems.

A Ghost immobiliser has another major benefit: your vehicle can only be started by a person who knows your PIN code and has physical access to your vehicle. This is a major advantage over traditional security systems that can be bypassed by simple cable tampering or a screwdriver.

If you forget your PIN, you can easily reset it by using the emergency PIN override function on a cell phone or computer. This is useful if are looking to start your vehicle after it has been left in a garage or by using a valet parking service.

The Autowatch Ghost 2 has been accepted for insurance by TASSA and is able to be installed by our authorised installers. It features the QR fingerprint system to identify parts that are not in use, Cost of Ghost Immobiliser which allows for the return of stolen items in the event that they are discovered. It can also be turned into a service mode', which allows the engine to start when your car is parked in a garage or with valet parking, but you will need to enter your PIN code again to exit the car.