공지사항

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy from theft by using the Ghost Immobiliser. This system is discreet & does not require additional key fobs in order to operate.

The device uses existing buttons on your vehicle (steering wheel doors, door panels and centre console) to create a unique pin code sequence that can be up to 20 presses. This allows your vehicle to begin.

Simple PIN Code Change Process

With the rising rate of vehicle theft, a lot of owners are seeking to improve their security. There are a myriad of security products that are available from tracking systems to alarms and immobilisers. However they do not all are equally efficient in protecting your vehicle. A tracking device can help you locate your vehicle in the event of it being stolen however it cannot stop the crime. An immobiliser, on the contrary is exactly what says on the tin: it disables your car's engine so that it cannot be started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it nearly impossible for thieves to take your vehicle.

By using the buttons that are already present in your car ghost immobiliser The ghost device is able to create a unique sequence which must be entered before the engine will start. This can be accomplished using the indicator stalk or window buttons. There is also a mobile app that can be used as an emergency PIN override, allowing the driver to operate their vehicle without the button sequence. This feature is particularly beneficial if you have to give your car away for valet parking or maintenance, as the immobiliser is activated, but not disabled.

The Ghost is a truly unique and innovative device which works in conjunction with buttons in your vehicle rather than as a separate device. This means that it is not only a highly effective protection against theft of your vehicle, but it can also be transferred over to any future cars you may own, making it much more of an investment than the traditional lock on your steering wheel.

Weatherproof small device

The autowatch ghost immobiliser for sale immobiliser fitting (escardio.my.Site.com) Ghost Immobiliser is an advanced security device that shields your vehicle from key cloning and hacking. It also stops ECU swapping. It's a weatherproof and small device that communicates directly with your vehicle's ECU over the CAN data bus to disable the engine. It can be plugged into the vehicle without any wiring and has been thoroughly tested to ensure compatibility with all vehicles. It is also resistant against jamming devices that are a popular technique used by thieves to bypass immobilisers.

The benefit cost of ghost immobiliser CAN data over conventional systems is that they work silently. It cannot be detected using sophisticated RF scanning and code-grabbing techniques as well as recognized by conventional diagnostic tools. The Autowatch ghost doesn't emit LED indicators and instead uses the buttons on your vehicle, such as the steering wheel, centre console or door panels to create a unique, programmable disarm sequence. This sequence can be extended by 20 or more presses to provide additional security. The iPhone app allows only one connection, using an individual pairing code for the Ghost. All communication between the two devices is protected.

The Ghost also stops thieves from stealing an additional key or replacing the ECU to bypass the immobiliser and start the engine. The engine will only run when a valid PIN code has been entered. It can also be put in valet/service mode to allow for temporary operation (with defined parameters like a 30mph speed limit) so that you can hand your car over to a valet service for maintenance without having to enter a pin code.

Tested for each vehicle

The Autowatch Ghost is the first aftermarket immobiliser for CANbus. It can be connected to the vehicle's wiring and also to the engine control unit (ECU). The device intercepts signals to stop your car from starting up normally until you enter a specific code. The system can be activated or deactivated by using your smartphone's app without the need for additional wires.

The standard factory immobilisers function by using a transponder, which is embedded in the key. This sends a message to the ECU. If the correct code is sent the car will start, but if a transponder is replaced by one from a different vehicle, the immobiliser cannot recognize it. This allows the vehicle to be stolen and started. The Ghost immobiliser was developed by a South African company at the top of security systems for vehicles technology. It safeguards your vehicle from hacking, key cloning and even key theft. The only way that a burglar could take your vehicle is physically towing it away and even then, they would not be allowed to drive it.

Ghost makes use of buttons on your vehicle, such as the indicator stalk, steering wheel, and door panels, to generate unique PIN codes that needs to be entered to use your vehicle. This is not required to use additional hardware like key fobs and can be as long as 20 presses long. It is also inaccessible to equipment for diagnostics and does transmit radio frequency signals, so thieves cannot use sophisticated RF scanners or code-grabbing techniques to determine if a system has been installed.

Ghost is more difficult to get rid of than car alarms, which require disarming by pressing the buttons. This makes it a great alternative to an GPS tracking device that can be used to track your vehicle after it's been stolen.

Emergency PIN code override

You do not have to go far on social media sites to find stories or even videos of vehicles that have been stolen by car ghost immobiliser thieves employing the latest technology tools available to them. This includes key-cloning devices as well as hacking tools that allow thieves to start the vehicle with the original keys.

The Ghost immobiliser was specifically designed to prevent this, and give you an additional layer of security in order to keep your vehicle from being targeted by thieves. It creates a unique pin code when pushing the buttons on your steering wheel, door panel, and the centre console. This unique PIN is entered along with the original key fob to prevent the engine from getting started. The unique override pin is found on a black card that you will receive after the installation. It is simple to remember because there are no LED indicators.

The device is hidden inside the vehicle's wiring and does not emit radio signals, so it can't be recognized by criminals using diagnostic software that can recognise what type of security system you have installed. This makes it an excellent alternative to an electronic device for tracking.

Unlike other security systems, which rely on a relay in the engine bay, these CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to shut down the vehicle completely by sending a digital block to the ECU and autowatch Ghost immobiliser fitting engine.

These systems can also be linked to a separate analogue alarm immobiliser or tracker. This should be decided prior to installation. They are also compatible with service/valet modes and an excellent alternative to a tracking device when you take your car to the dealer for repairs to an electrical issue.

Service/Valet Mode

In recent years, there has been a rise in the number of vehicles that are stolen without owners' keys. It is more easy than ever to steal your pride and joy due to the availability of key cloning devices and door lock picks. We have developed the Autowatch ghost immobiliser 2 Immobiliser to combat this. It prevents your car from being driven, even if you keys have been cloned.

It directly communicates with your vehicle's ECU (Engine Control Unit) via the CAN data circuit. It's completely quiet since it doesn't use radio frequency or a key fob. It can't be detected by diagnostics or any other hacking device. It also protects against adding a new key or replacing the ECU to get around the system since only the correct PIN code can allow the engine to start.

The device is hidden inside your car, using buttons on the steering wheel, the centre console and door panels. A unique and changeable PIN code sequence up to 20 digits has to be entered prior to being able to start your car.

This is the very first aftermarket CAN-bus immobiliser for the market that is being created. It can prevent your vehicle from being driven or even started in the event that you do not enter a PIN code before entering. If the device is in armed and you attempt to drive off it will display an indication on your dash that will flash continuously for about 300m. If you type in your PIN code at this point it will deactivate the anti-hijack device and your car will continue to drive just as normal. If you don't enter your PIN code at this time the indication will continue to flash and require a new PIN code for every attempt to start your vehicle.