공지사항

Autowatch Ghost II Immobiliser Review

Autowatch Ghost immobiliser is the next step in car security. It is undetectable by thieves and is impossible to start without either a unique pin code or app authorisation.

The system is based on the CAN Data network and is silent and therefore cannot be detected by common thieves diagnostic tools or radio signals. It doesn't require any circuit cuts to be made before installing.

What is a ghost immobiliser?

Ghost Immobilisers help protect your vehicle from theft by stopping it from starting until a unique pin code is entered. It can be used in a variety of vehicles, and unlike standard immobilisers, it does not require a fob or key to operate. It is also extremely difficult to hack or bypass and works silently, meaning a thief would need to work fast to make a getaway without being detected.

It guards against key locking, signal jamming, and spoofing. These are all methods that thieves have been using to gain access to cars using standard immobiliser systems. The device deters thieves from stealing keys by snatching them in your letterbox or breaking into your home to steal the remote control. The device is able to stop thieves from taking your joy and pride even if they manage to obtain the key. It will stop them from starting it until they enter the code.

Unlike passive immobilisers that require an ignition key or fob to be activated, a ghost immobiliser is designed to be enclosed within the engine and connects directly to the vehicle's CAN data circuit. The system creates a pin code when you press buttons on the steering wheel or the console of your car. You will have to enter this code before the engine can begin. The system can be put into an operating mode that allows your car to start and drive for short periods of time without needing an PIN code. However, the service mode will end based on time and speed.

Due to the technology used in the process, it cannot be bypassed or hacked, even using advanced equipment like codes grabbing or RF scanning devices. It is also impossible for a normal immobiliser to be disabled because it doesn't transmit a signal as a standard vehicle immobiliser does and only works when connected directly to the CAN circuit.

As a result of its high-tech technology and easy installation, the ghost immobiliser is now insurance Approved by TASSA (Tracking & Aftermarket Security System Association). We are a proud TASSA approved Ghost installer and can fit the device in your vehicle for insurance purposes.

What is the Ghost Immobiliser Work?

Immobilisers stop your car from starting if the wrong key or remote is used. This is done by sending an error code from the wrong fob or key to the ECU (Engine Control Unit). The ECU will not be able to recognize it and your car will not start. It is crucial to ensure that your car is fitted with an immobiliser by an established and reputable specialist.

At MotorGuard, MotorGuard is the Midlands leading vehicle security specialists and installers. We offer Autowatch Ghost immobilisers for many modern vehicles. You can rest assured that your pride and joy will be secure from theft.

The Autowatch Ghost is the first aftermarket CAN-bus immobiliser system in the world. It shields your vehicle from key cloning and hacking as well as theft. It is designed to be undetected by car burglars because it does not have LED indicators or key fobs. It can also be hidden within the wiring of your vehicle so that no additional hardware is required.

Once installed, it's linked to the CAN system of your vehicle. It allows you to create a unique disarming sequence with your pin code. This must be entered prior to driving the vehicle. The pin code can be up to 20 presses long to provide security. If you forget your pin number, or if a button has become damaged, the device comes with an emergency pin code that can be used to reset the button and allow your vehicle to start once again.

It's because the Ghost immobiliser isn't able to be bypassed or hacked, that it is such a deterrent to thieves. Additionally, it is also TASSA insurance-approved (Tracking and Aftermarket Security Systems Association) which could lower your car insurance costs.

Ghost immobilisers continue to evolve as technology improves. We recommend you contact an Autowatch ghost immobiliser install fitter as quickly as you can in order to safeguard your pride and joy. Whether you're buying a new vehicle, or looking to upgrade your existing vehicle, you can count on us to provide you with top-quality service so that you can feel confident in your pride and joy for years to come.

Is Ghost Immobiliser compatible with my car?

The Ghost is the first aftermarket CAN bus immobiliser system to offer total protection against modern-day vehicle theft. It protects against key cloning, car hacking, as well as ECU swapping. The latest TASSA verified Ghost-II systems also provide vehicle marking and linking to the International Security Register enabling your insurance company to confirm that you have a legitimate Ghost system installed.

Our Ghost Immobiliser Install, Biberi.Lavinia@Cineteck.Net, Immobiliser prevents thieves from beginning your engine by requiring a unique pin code sequence to be entered or the presence of your phone with our Autowatch app downloaded before it can be used. It functions like a pin for a bank card, and makes it impossible to drive away with your pride and joy without entering the correct pin or phone. Our Ghost Immobiliser System is integrated into the CAN Data Network so there are no wire cutting required and the system is completely silent. It is inaccessible to thieves and cannot be detected by the sophisticated RF scanning and code grabbing technology that other systems utilize.

Once the Ghost is installed by our trained fitters it's completely hidden and undetectable to the naked eye. it makes use of the buttons on your vehicle, for instance on the steering wheel, door panels and the centre console to generate an individual pin code sequence that must be entered before your engine can start, just as a password on a bank account. This is then linked to your smartphone using the Autowatch app to allow you to switch into a temporary 'Service or Valet' mode which disables the ghost for up to 30 minutes as you hand over your vehicle for repair or transport.

It's no surprise that the number stolen vehicles has risen dramatically. This is because of the extensive personalisation and modification that are employed in modern vehicles as well as the fact that many of us own older vehicles. Many of them are expensive and scarce vehicles that take a long time to repair after being stolen. Hence, making sure that your vehicle's security is not at risk of becoming the next target is crucial. A Ghost immobiliser is a low-cost investment that will ensure your vehicle stays safe and can even be used to recover it if it does become stolen.

Does a Ghost Immobiliser operate on the cut principle?

ghost immobiliser fitter immobilisers work by blocking your vehicle's engine from starting until an additional PIN is entered with your key fob. This prevents thieves from cloning keys to your car or hacking into your car's system. This can encourage them to leave your vehicle completely.

Once installed, Ghost immobiliser Install your ghost 2 immobiliser near me immobiliser creates a unique pincode of up to twenty digits, which you can enter using the buttons on your vehicle (steering wheels, centre consoles, or door panels). This code must be entered in order to start your car. This code sequence is required each time you wish to drive your car, just like a password or PIN on a bank card. This code can easily be reset by entering a number sequence in the Ghost app.

The Autowatch Ghost II CAN has two deactivation mode for valet services and valet, which allow you to temporarily start your car without having an access code - like the keyfob - when it is in a garage or at a valet parking service. The immobiliser will then reactivate automatically when your car is in a parking spot.

Unlike other security devices on the market, the ghost immobiliser fitter is totally undetectable by modern thieves as it does not have any LED indicators, and it operates in a silent manner using your vehicle's CAN data network. It's also not prone to the same cuts in circuits that other security systems are as it does not make use of radio signals.

As a result, it can be set up in a way that is discreet and hidden from view and therefore is difficult for thieves to detect. It is also not recognized by sophisticated scanning tools or code grabbing technology which can often be used to locate and disable security devices.

The Ghost is a high-quality modern CAN bus immobiliser that provides top-of-the-line security against key cloning, car hacking and relay theft. It's simple to set up and is inaccessible to thieves. It is not able to be deactivated with simple wire cutting. This makes it a must for any motorist who wants to secure their vehicle.