공지사항

Protect Your Pride And Joy With The Ghost Immobiliser

Secure your prized possessions against theft with the Ghost Immobiliser. It is discreet and does not require any additional key fobs.

The device uses existing buttons on your vehicle (steering wheel doors, door panels and centre console) to create a unique changeable pin code sequence up to 20 presses. This will allow your vehicle to start.

Simple PIN Code Change Process

With the growing rate of vehicle theft, many owners are looking to upgrade their security. There are many different types of security products that are available for sale that range from tracking systems to alarms and immobilisers. However, not all of them are equally effective in protecting your vehicle. While a tracking system can assist you in locating your car in the case of theft, it does not prevent the crime from happening in the first in the first place. Immobilisers, on the other hand is exactly what is A ghost immobiliser (https://catalog.aforevo.com/forums/user/woolendrive77) says on the tin: it shuts down your car's engine to prevent it from being started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it virtually impossible for thieves to take your vehicle.

The ghost device uses the buttons on your car to create an unique sequence that needs to be entered to allow the engine to start. This can be done using the window, heater or indicator stalk buttons. In addition to this it is possible to use an app for mobile devices that acts as an emergency PIN code bypass and allow the driver to operate the car without the button sequence. This is especially useful if you need to hand your car over to a valet service or parking because the immobiliser will still be activated, but not disabled.

The Ghost is an unique and innovative device that works by using your vehicle's buttons rather than as a separate unit. It's not just an effective deterrent to theft of your vehicle, but it can also be used on any future vehicles you may own. This makes it a far better investment than a conventional wheel lock.

Small, weatherproof device

The Autowatch Ghost Immobiliser is a high-tech security system that safeguards your pride & joy from key cloning and hacking. It also stops ECU swapping. It is a small weatherproof device that connects with the ECU of your vehicle directly via the CAN bus, causing it to shut down the motor. It can be installed in the vehicle without the need for additional wiring and has been thoroughly tested to make sure it works with all vehicles. It is also resistant to jamming devices that are a common technique used by thieves to get around the immobilisers in place.

The advantage of CAN data over traditional systems is that they operate silently. It isn't detected by sophisticated RF scanning or code-grabbing technology and is also undetectable by traditional diagnostic tools. The Autowatch Ghost does not employ LED indicators, but instead uses buttons on your vehicle, like the steering wheel, the centre console, or door panels, to create an unique sequence of disarming. The sequence can be extended by 20 presses to provide additional security. The iPhone app permits a single, authorised connection using the pairing code unique to the ghost immobiliser installers near me and communication between the two is encrypted.

The Ghost prevents car thieves adding an ignition key that is not in use or replacing the ECU in order to bypass the immobiliser. It will only allow the engine to start if the correct PIN code is entered. It is possible to operate temporarily in Valet/Service mode (with the appropriate parameters, like a 30mph speed limit), so you can offer your vehicle to an attendant or valet without needing to enter the code.

Tested for each vehicle

The Autowatch Ghost is the first aftermarket immobiliser on the CAN bus that can be connected to the existing wiring in your vehicle and connects to your engine control unit (ECU). The device detects signals to prevent your car from starting up normally until you enter a custom code. The system can be activated or deactivated using your own smartphone application without the need for additional wires.

Standard factory immobilisers in vehicles work by having a transponder inside the key that sends an electronic signal to the ECU. The car will start when the correct code is transmitted. If, however, the transponder from a different vehicle is used instead, the immobiliser will not recognize it. This allows the vehicle be stolen and started. The Ghost immobiliser was developed by a South African company at the forefront of vehicle security systems technology. It protects you from key cloning or hacking, and even key theft. The only way a thief could take your vehicle is physically towing it away and even then they would not be able to drive it.

Ghost makes use of buttons on your vehicle, including the indicator What is a Ghost Immobiliser stalk, steering wheel, and door panels, what Is a ghost Immobiliser to create an individual PIN code which must be entered to use your car. This is done without any extra hardware, such as keys fobs. It can take up 20 to 20 presses. It is also undetectable by equipment for diagnostics and does transmit radio frequency signals, so thieves cannot make use of sophisticated RF scanners or code grabbing techniques to determine if the system has been set up.

Ghost is more difficult to remove than car alarms that require disarming with the buttons. This makes it a fantastic addition to an GPS tracking device that can be used to locate your vehicle after it's been taken.

Emergency PIN code override

You don't have to go far on social media sites to find stories or even videos of vehicles that were stolen by car thieves using the latest technology tools available to them. This includes key-cloning and hacking tools that allow them to start your vehicle without the original key fobs.

Our Ghost immobiliser fights this issue and offers an additional layer of security to stop your vehicle from being stolen if it is targeted by thieves. It is created by creating an unique pin code push sequence using your existing buttons on the steering wheel, door panel, and the center console. This unique PIN is entered alongside your original key fob in order to stop the engine from getting started. The unique PIN for override is on the black card that you will receive following your installation. It's easy to remember because there are no LED indicators.

The device is hidden in the wiring of your vehicle and doesn't emit radio signals. This means it can't be detected by diagnostic software that can tell the security system you have installed. This makes it an excellent alternative to an electronic device for tracking.

Contrary to most security systems that use a relay inside the engine bay these CANBUS Immobilisers communicate with the vehicle's ECU and BCM via the CAN data bus (brand dependant). This allows them to disable the vehicle completely by sending an electronic block to the ECU and engine.

These systems can also be linked to a separate analogue alarm immobiliser or tracker. This must be specified prior to the installation. They are also fully service/valet mode compatible and are a great alternative to a tracker if you are you have your car checked for repair at the dealer.

Service/Valet Mode

In recent years there has seen an increase in the number of cars being stolen without the owners keys. It's easier than ever before to steal your pride and joy due to the availability of key cloning devices and door lock picks. We have created the Autowatch Ghost Immobiliser to combat this. It prevents your vehicle from being driven even if you keys have been copied.

It communicates directly to your vehicle's ECU (Engine Control Unit) via the CAN data circuit. It's completely silent since it doesn't utilize radio frequencies or keys fobs. It isn't detected by diagnostics or any other hacking device. It also prevents the addition of a new key or replacing the ECU to get around the system since only the correct PIN code can allow the engine to start.

The device is hidden inside your car by using buttons on the steering wheel, centre console and door panels. Before you can begin your car, you must enter a unique, changeable PIN code that can be as long as 20 digits.

This is the first aftermarket immobiliser for CAN bus to be created that will stop your car from being driven away or started without a PIN code being entered prior to. If the device is in armed and you try to drive away, it will display an indicator on your dash which will flash on a regular basis for approximately 300m. If you enter your PIN code at this point, it will disarm the anti-hijack device and your car will continue to operate in the normal way. If you don't enter your PIN code at this time the indication will keep flashing & will require another PIN code for every attempt to start your car.