공지사항

Double Glazing Repair

Double glazing is popular among homeowners because it reduces energy consumption and improves security. However, there are occasions when problems occur and these require fixing quickly.

While it is possible to carry out some double glazing in glazing repair yourself, certain tools are required, and it's generally best to leave it to a professional. This will ensure that the work is carried out correctly and you get a new warranty.

Misting

This is a common problem with double-glazed windows. It is not only visually unattractive, but it can also affect your view as well as the efficiency of your home's energy. Having misty windows will mean that the seals between the glass panes aren't securing as they should and could let moisture into.

This moisture can result in condensation, which will make the glass appear foggy. It can also harm your window's insulating properties as cold air can leak through the window and warm air will escape, leading to more expensive bills.

This is due to the seals on your uPVC windows breaking down, allowing moisture to enter. This can happen for many reasons, including a mis-fitting window or window that is flexing or simply age. Most good double glazing comes with an insurance policy against this, so if they were installed recently you may be able to have them replaced or repaired.

You can prevent this problem from occurring by making sure that you have adequate ventilation in your home, particularly during the winter months, to prevent the build-up of humidity. Using a hairdryer to evaporate the surface condensation can be an efficient and quick method to aid in defogging your double glazing. Be cautious not to melt the seals or gaskets by heating them.

It is also crucial to make sure your windows are not covered with dirt or dust that can build up and block vents. If you frequently use the kitchen or bathroom it is important to keep them open to ensure that steam can escape, this will prevent it from forming on the windows surface. Avoid hanging towels in the shower or pans over radiators. These can all cause condensation.

If you notice that your double glazing has become blurred, it is possible to get this repaired but the method used will differ based on the company you choose to use. One method involves drilling a small hole into the sealed unit, and then pumping or injecting an desiccant to absorb the moisture. The company can then place vents in the holes to allow airflow, which reduces the chance of condensation in the future.

Condensation

The most obvious sign that your double-glazed windows require repair is the presence of condensation between the glass panes. This is visible as water droplets or fog between the two glass panes. It's not just ugly but also affects the effectiveness of double glazed windows. One of the primary advantages of modern double glazing is that it stops heat from leaving your home, and instead insulates by trapping an air-filled space between the two layers of glass. This means that the gap between the window panes must be airtight and contain an insulating gas, such as argon. Moisture in this gap means that the window seal isn't working.

It is not unusual to get condensation in the outside of your window during rainy weather or in damp weather like a heavy dew in the morning but it should only occur for brief durations and can be cleaned up easily with the help of a sponge or cloth. If the condensation is located in the middle, it can be a bigger issue and your window might have shattered its seal.

This could be caused by ageing or a defect in the seal itself which is typically caused by a change in temperature as this causes moisture to build up on the inside and outer surfaces of your window. It can also happen when the frame of your window repair shifts little bit, or the plastic that is used to cushion the glass is compressed.

If your double glazed windows are misting, it is important to seek professional advice. DIY kits are available for windows that have mist but they aren't always the best option. They usually require drilling directly into the glass. A reputable double glazing repair company will be able to assist you and offer you a quote for the work to be carried out.

A reputable double-glazing repair specialist will remove the affected pane of glass from the frame prior to piped hot air into the gap to dry it out and then a new seal is applied. They will also provide advice on ways to prevent condensation in future such as installing trickle vents on your windows and doors that will allow fresh air to infiltrate your rooms, without letting warm air escape, which means that moisture doesn't build up on cold surfaces.

Gasket Seals

The gasket seal plays an essential part in any weatherproof windows, or door. It acts as an obstruction between the opening sash the window and its exterior Double glazing repair frame when it is compressed. This can stop draughts and water ingress, which can be both annoying and damaging. In double glazed windows and doors, special gasket seals of various types are installed between glass panes in order to keep them solidly in place. Gasket seals can shrink or perish with time. If this happens, it's best to replace them quickly to avoid long-term damage.

One of the most common signs of a failing window seal is that it starts to fog. Foggy windows are difficult to clean as the moisture trapped between the multi-panes of glass won't easily disperse. In addition, faulty seals can cause condensation and stains, especially on the exterior surface of the window. It is recommended that you contact a double-glazing repair company if you notice any of these problems.

There are several ways in which window seals can be repaired but there is a trade-off between cost and efficiency when choosing this option. While it is more expensive to have your window seals repaired professionally, they are likely to last longer and offer more performance. A uPVC specialist can assist you to choose the right product for your home.

Some people choose to leave a broken window seal in place, however, this isn't recommended. It could result in a significant increase in your energy bill and cause your windows to fog up more. In addition, the damage to the seal will continue to get worse on its own, which is why it is better to get it fixed as soon as possible.

Luckily, there are some actions you can take to ensure that your window seals aren't damaged from breaking. For example it's best to avoid power washing your doors or windows as this can put the seals under pressure. It is also beneficial to have your windows and french doors installed by a professional to ensure that they are fitted correctly. This will reduce the chance of problems like a poor installation, or warping of frames that can cause stress on window seals.

Frames

Double glazing is strong and tough, but like anything else, it is prone to have problems in time. Many of these issues can be easily fixed, reducing the cost of replacing the entire window. Sagging, condensation, misting or difficult to open frames are a few of the problems that can be resolved with professional double glazing repair.

Whether you have PVCu, aluminium or timber windows, they will all benefit from targeted maintenance. This will keep moisture out of the window, which can cause the window to rot. Repairs can be costly. Regular inspections and cleaning can help keep water out of important joints, particularly the lower areas of jambs and cills. This is where the most deterioration occurs.

A simple wipe using a damp cloth will help to reduce condensation between the panes of glass. It is also helpful to leave an open vent in the room or to make use of a dehumidifier. These steps can improve the air quality of a home and prevent the need to replace costly double glazing.

The type of frame you choose will affect the repair costs of double glazing because different materials require different solutions to deal with condensation. A wooden window is easier to repair than an aluminium or PVCu one, as wood preservatives are available. Metal requires special fillers and paints.

If you notice that your double-glazed windows or doors are difficult to open due the fluctuating temperatures, it could be because the frame is expanding and contracting, which causes stiffness. If this is the situation, you may consider cooling the frames or lubricating them (especially when they are sliding windows). If the issue continues to persist and your double glazing seems to be losing its effectiveness You may want to think about replacing it instead.