공지사항

Protect Your Pride And Joy With The Ghost Immobiliser

Secure your prized possessions against theft with the ghost immobiliser birmingham Immobiliser. This system is discrete and does not require additional key fobs.

The device utilizes buttons on your vehicle (steering wheel doors, door panels and centre console) to create a unique pin code sequence that can be up to 20 presses. This will allow your vehicle to begin.

Simple PIN code Change Process

With the rising rate of vehicle theft, a lot of owners are looking to improve their security. There are a variety of security devices that are sold aftermarket from tracking systems to alarms and immobilisers. Not all of them are equally effective in protecting your vehicle. While a tracking device can assist in finding your vehicle in the event of theft, it does not prevent the crime from happening in the first place. Immobilisers, on the contrary, does exactly what it says on the tin: it shuts down the engine of your vehicle to prevent it from being started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it virtually impossible for thieves to take your car.

The ghost device utilizes the buttons on your car to create a unique sequence which must be entered to allow the engine to begin. This can be done via the indicator stalk or window buttons. In addition, there is also an app for mobile devices that acts as an emergency PIN code override and allows the driver to operate the car without the button sequence. This is a great solution when you wish to donate your car to valet parking or for servicing. The immobiliser will stay active.

The Ghost is a truly unique and innovative device which is used in conjunction with the buttons of your car rather than as a separate device. It's not just an effective deterrent to theft of your vehicle however, it can also be used on any future vehicles you may own. This makes it a better investment than a traditional wheel lock.

Small, weatherproof device

The Autowatch Ghost Immobiliser is an advanced security device that shields your pride & joy from key cloning and hacking. It also prevents ECU swapping. It's a small weatherproof device that connects with the ECU of your vehicle directly through the CAN bus, causing it to shut down the motor. It can be plugged into the vehicle without the need for additional wiring and has been thoroughly tested to ensure it works with all vehicles. It is also indestructible to jamming devices which is the most common method used by thieves to get around existing immobilisers.

The advantage of using CAN data is that it operates silently when compared to conventional systems. It's not detected by sophisticated RF scanning or code-grabbing technology and is also undetectable by traditional diagnostic tools. The Autowatch Ghost doesn't use LED indicators but instead utilizes buttons in your vehicle, like the steering wheel, the centre console, or door panels, to create a a unique disarming sequence. You can even create a sequence that is up to 20 presses long for added security. The iPhone app allows only one, authenticated connection using the pairing code unique to the Ghost and communication between the two is secured.

The ghost immobiliser for sale will stop car thieves from putting in a new ignition key or replacing the ECU to bypass the immobiliser. The engine will only start only if a valid PIN has been entered. It is also possible to put it into Valet/Service mode for temporary operation (with defined parameters like a 30mph speed limit) to allow you to hand your car over to a valet service to be serviced without needing to enter a pin code.

Tested for each vehicle

The Autowatch ghost immobiliser 2 is the first aftermarket CANbus immobiliser. It can be connected to the vehicle's wiring and also to the engine control unit (ECU). The device intercepts signals to stop your car from operating normally until you enter a custom code. The system can be turned on or off by using your smartphone app without the need for additional wires.

The standard factory immobilisers function with a transponder which is integrated into the key. This sends a message to the ECU. If the correct code is transmitted the car will start however, if the transponder is swapped with one from a different vehicle, the immobiliser will not recognise it. This makes it possible for the vehicle to be stolen and started. A South African company that is at the forefront of vehicle safety systems technology has developed the Ghost immobiliser. It protects you from hacking or key cloning, and even key theft. Only by physically towing your car away from thieves could they get it, and they would still not be able drive it.

Ghost makes use of buttons in your vehicle, such as the indicator stalk, steering wheel, and door panels, to create a unique PIN code which must be entered to use your car. This is done without extra hardware, such as a keyfob. It can take up 20 to 20 presses. It is also unrecognizable by equipment for diagnostics and does transmit radio frequency signals, so thieves cannot make use of sophisticated RF scanners or code-grabbing techniques to determine if a system has been installed.

Contrary to physical anti-theft devices such as clamps or wheel locks Ghost is hidden within the vehicle, so it cannot be taken away or disabled by thieves. It is even more difficult to get rid of from a car alarm which requires disarming using the use of a button sequence. This makes it a fantastic alternative to an GPS tracking device that can be used to track your vehicle after it's been taken.

Emergency PIN code override

You don't have to look very far on social media to find stories or videos about cars that have been stolen with the latest technology tools. This includes key-cloning devices and hacking tools that allow them to start the vehicle with your original keys.

Our Ghost immobiliser combats this and provides you with an additional layer of security to prevent your vehicle from being taken when it is targeted by thieves. It generates a unique pin code when pushing the buttons on your steering wheel, door panel and centre console. This unique PIN is entered along with your original key fob to stop the engine from getting started. The unique override pin can be found on a black card which you will receive following your installation. It is easy to remember because there are no LED indicators.

The device is hidden in the wiring of your vehicle and does not emit radio signals. Therefore, it cannot be detected using diagnostic software that can determine what type of security systems you have installed. This makes it a fantastic alternative to the tracking device.

In contrast to other security systems which rely on a relay in the engine bays, immobilisers CANBUS communicate through CAN databus (brand dependent) with the ECU and BCM of the car. This allows them to disable the vehicle completely by sending an electronic block to the ECU and engine.

It is also possible to connect an analog immobiliser, alarm or tracker to these systems, but this has to be specified prior to installing the device. They are also fully service/valet mode compatible and are a great alternative to a tracker you have your car checked for repair at the dealer.

Service/Valet Mode

In recent times, there has been a rise in the number of vehicles being stolen from owners without keys. With easy access to key cloning tools and door lock pick sets, it is now easier than ever for thieves to take your prized possessions. To stop this, we have launched the Autowatch Ghost immobiliser that prevents your vehicle from being driven even if your keys have been copied or your car has been stolen.

It connects directly to your car's ECU (Engine Control Unit) through the CAN data loop. It's completely silent since it doesn't use radio frequency or a key fob. This means it isn't detected by diagnostics or any other car hacking devices. It also protects you from adding the new ECU or key to circumvent the system, as only the PIN code allows the engine to be started.

The device is hidden in your car and is accessible via buttons on your steering wheel, center console and door autowatch ghost Immobiliser panels. Before you can begin your car, you must enter a unique and changeable PIN number that is up to 20 numbers.

This is the first aftermarket immobiliser CAN bus that has been created that will stop your car being driven away or started if a PIN code isn't entered prior to. If you are driving away with the device arming the indicator will flash on your dashboard which will flash continuously for approximately 300m. Entering your PIN code will deactivate the anti-hijack. Your car will continue to function just as normal. If you do not enter your PIN code at this point, the indicator will continue to flash and will require a new PIN code for every attempt to start your vehicle.