공지사항

Double Glazing Repair

Double glazing is a favorite choice for homeowners as it saves energy and also increases security levels. However, sometimes problems arise and require fixing as soon as possible.

It is possible to fix double glazing on your own, but you'll require specific tools and it's best to leave it to the experts. This ensures that the task is done correctly and that you receive an updated guarantee.

Misting

This is a frequent issue with double-glazed windows. It is not only ugly, but it can also impact your view and the energy efficiency of your house. The presence of misty windows indicates that the seals between glass panes are not sealing as they should and could allow moisture to get into.

The moisture can cause condensation, which can make the glass appear blurred. It could also affect the window's insulation properties since cold air will leak into the window and warm air escapes, resulting in higher bills.

The most common cause is when the seals inside your uPVC window break down and allow moisture to get into. This happens for a number of reasons including mis-fitting, flexing or even just age. The good news is that a majority of good double glazing windows glazing comes with a promise against this so if you have recently had them installed, it is likely that you will be able to get them replaced or repaired.

You can prevent this problem from occurring by ensuring you have ample ventilation in your home, particularly during the winter months, to prevent the build-up of humidity. Using a hairdryer for the purpose of removing the surface condensation can be an effective and quick way to help defog your double glazing. Just be careful not to overheat gaskets or seals that could cause them to melt.

Also, you should ensure that your windows are free of dirt and dust which could build up and block the vents. You should leave the windows in the kitchen and bathroom open if you use them regularly. This will allow any excess steam to escape and prevent condensation from forming. It is also a good idea to avoid hanging things like towels in the bathroom, or pots on radiators, as they could be a source of condensation.

If you notice that your double glazing has turned blurred, it is possible to fix it however the method employed will vary depending on the company you use. One option is to drill into the sealed unit a small opening and then injecting or pumping in desiccant. This will absorb the moisture. The company can then install vents in the holes to allow airflow, thus reducing the chance of condensation in the future.

Condensation

The most obvious indication that your double-glazed windows require repairs is the appearance of condensation between glass panes. This is visible as water droplets or fog between the two glass panes. It's not just unsightly however, it also impacts the effectiveness of double glazed windows. Modern double glazing has the advantage of preventing heat loss and insulating your home by trapping air between the two layers. This means that the space between your window panes needs to be air tight and contain an insulating gas, such as Argon. If you notice that there is moisture in this space, your window seal may be failing.

It is not uncommon to experience condensation on the outside of your window during rainy weather or in humid weather, such as a heavy morning dew However, this should only occur for brief durations and can be cleaned up easily with an abrasive or a sponge. If the condensation is located situated in the middle of the double-glazed window, it could be more severe and it is likely that the window has shattered its seal.

This could be due to the aging process or a flaw in the seal. Most often it is caused by a change in temperatures that cause moisture to form both on the outside and inside of your windows. It can also happen when the frame of your window shifts little bit, or the plastic that cushions the sheets of glass gets compacted.

If your double glazed windows are smudged, it's crucial to seek out professional help. DIY kits are available for windows with mist but they aren't always the most effective solution. They usually require drilling directly into the glass. A reliable double glazing repair business will be able to assist you and provide a quote for the work to be carried out.

A professional with a good reputation for double glazing repair will typically remove the damaged window pane from the frame prior to hot air is piped into to dry out the gap and the seal is re-applied. They can also give you tips on how to avoid condensation in the future, like installing trickle ventilation in your doors and windows which allows fresh indoor air to enter without letting warm air escape. This will stop moisture from forming on cold surfaces.

Gasket Seals

The gasket seal plays a vital role in any weatherproof window or door locks. It creates an obstruction between the opening sash the window and its outside frame when it is compressed. This can prevent draughts, and double glazing repair water ingress which can be both irritating and damaging. In double glazed doors and windows, special types of gasket seals are installed between glass panes to keep them securely in place. Gasket seals can be weakened or disappear over time. If this happens, it is recommended to replace them immediately to avoid long-term damage.

One of the most typical indicators of a faulty window seal is that it starts to fog. Foggy windows are difficult to clean because the moisture that is trapped between the various panes of glass is not easily dispersed. In addition, faulty seals can cause condensation and stains particularly on the external surface of the window. It is recommended to contact a double glazing repair service if you spot any of these issues.

There are a variety of ways to repair window seals but the cost and efficiency of this option should be considered. While it's more expensive to have your seals professionally repaired by a professional, they will last longer and perform better. A uPVC expert can assist you in making the right decision for your home.

Some people decide to leave a damaged window seal in place however, this isn't recommended. It could lead to an increase in your energy bills and cause your windows to become more hazy. In addition, the damage to the seal will continue to deteriorate on its own, which is why it is better to get it repaired when you can.

Luckily, there are some ways you can help prevent your window seals from breaking. For example it's best to avoid the use of power washers on your doors or windows as this can put the seals under pressure. It is also beneficial to get your windows and doors installed by a professional so that they are fitted correctly. This will minimize the risk of problems such as a bad installation, or warping of frames that can increase the stress on window seals.

Frames

Double glazing is renowned for Double Glazing Repair being tough and durable however, as with all new windows it will develop issues over time. Many of these problems can be fixed easily, reducing the expense of replacing the entire window. Condensation, misting and sagged or difficult to open frames are just some of the common problems which can be solved with professional double glazing repair.

No matter if you have PVCu, aluminium or timber windows, they could all benefit from targeted maintenance. This will stop moisture from entering the window, which can cause rot and can be costly to fix. Regular inspection and cleaning can keep water out of vital joints, especially the lower parts of jambs and cills, where degradation is the most prevalent.

A simple wipe with a damp cloth can aid in reducing condensation between the glass panes. It is also helpful to keep an open vent in the room or utilize a dehumidifier. These steps can increase the quality of air quality of a home and avoid the need to replace expensive double glazing.

The kind of frame you choose can influence the cost of double glazing repair since different materials require different solutions to deal with condensation. For instance, a wood window will be easier to repair than an aluminum or PVCu one since it can usually be treated with wood preservatives while metal requires a more extensive method using specialized paints and fillers.

If you notice that your double-glazed windows or doors are difficult to open due to varying temperatures, this could be because the frame is expanding and contracting, which causes stiffness. If this is the case you might consider cooling the frames or lubricating them (especially in the case of sliding windows). However, if the issue is persistent and your double glazing appears to have lost its energy efficiency, it may be worth looking into lock replacement instead.