공지사항

Ghost 2 Immobiliser Problems

The Ghost 2 immobiliser, designed to guard cars against key cloning or hacking is a small device that can be installed without damaging your vehicle. It stops your vehicle from starting unless you enter an exact sequence of keys within your vehicle similar to the password you enter on mobile phones.

Stop/Start

Ghost immobilisers stop vehicles from being stolen by preventing the engine from starting until it receives the right PIN code. This is done with no modifications to the vehicle and is totally undetectable to thieves. The unit is directly connected to the ECU via the CAN databus in order to disable a vehicle. This is the same system that used by car manufacturers for years. However, thieves cannot bypass it with a new key or key relay technology, as they can do using factory-installed systems.

Ghost Ghost can be fitted to any car, van motorhome, caravan, or bicycle that has an engine and is compatible with all popular makes of vehicles. The same system is compatible with electric cars. It's an excellent alternative to wheel clamps and steering wheel locks.

When the Ghost is activated, it will stop all buttons in your car and prevent the ignition being started without a PIN number. You can enter the code manually or through the Android or Apple app. If the incorrect code is entered, the app will show an indicator light. The Ghost will then not allow the vehicle be started again. This is a great method to discourage thieves. If the vehicle is unable to be started and they are unable to get it started, they will leave.

The Ghost is a small, weatherproof device that can be hidden in the most difficult to reach parts of your car. The installation process takes between 20 and 30 minutes for each vehicle. It is also very simple to remove should you choose to switch your vehicle or ghost 2 immobiliser problems give it away for valet parking or service. It is an TASSA (Tracking and Aftermarket Security Systems Association), insurance approved system that is recognized by a few insurance companies. It also features an emergency lock that is secure Pin Code Override, and the Service/Valet feature that can be activated by pressing a button within the app or by using your key fob.

Disarm

Ghost immobilisers like mechanical anti-theft devices that can be removed, are concealed within the car. They are virtually impossible to hack or bypass and, even if they are discovered, a burglar is unable to start the engine. Ghost immobilisers are able to prevent key cloning and signal jamming and devices spoofing. These are techniques thieves employ to gain access to vehicles that have standard immobilisers.

The immobiliser sends a message to the ECU. If a wrong code is received and the vehicle is not launched as the engine won't start up. Although it is possible to disable the ghost immobiliser using a software tool this is very laborious and time-consuming. The software must be installed and operated by a authorised installer.

The ghost 2 immobiliser reviews immobiliser, a tiny system, is hidden within the vehicle's wiring loom. It is not visible to the naked eye once installed. It won't show up on diagnostic systems, there aren't LED indicators, and it does not communicate with the engine through the OBD port. It communicates silently through the CAN data loop.

The system will block the vehicle from starting until it is able to receive a user-defined PIN code sequence. This is entered through buttons on the steering wheel or door panels, or on the centre console. This is a better way to safeguard your car as it doesn't require an additional remote control or key fob.

In addition to this Ghost has the option of a service mode that can be activated using the application on your mobile phone. This allows you to give your keys to someone else for service or valet parking without entering the disarm sequence.

You should not remove the system on your Ghost by yourself, no matter whether it's in service mode. This can damage the engine. It is recommended to speak with an installer certified by TASSA who will safely and effectively remove the system. Our most recent GHOST immobilisers include a special fingerprint QR sticker hidden in various areas of your vehicle. These are linked to our security register. In the event that the device is removed and then sold on the blackmarket this will allow you to trace the owner of the system.

Anti-Hijack

ghost immobiliser installer Immobiliser 2 has a highly effective anti-hijack function. This system works like a smart key and is among the most secure ways to keep your car safe from thieves. The ghost 2 immobiliser problems system will automatically switch on the hazard lights and stop the engine when the ignition is on and the vehicle is stationary. This gives the driver and passengers time how to fit a ghost immobiliser press the hidden security button before the system is activated.

Contrary to many other systems that simply stall the engine whenever the ignition is switched to on and on, the Ghost system is based on a specific controller and timer unit which will shut off the valve for cutting off fuel 14 if it is activated after a set period of time, even in the event that the ignition is turned on! The delay time interval must be long enough to allow the owner of the vehicle who was hijacked of the vehicle to drive away from the location of the robbery and sufficient distance from the vehicle that is stalled before the system is able to reactivate.

In addition to the standard CANbus immobiliser blocking features of the Ghost system, it also comes with an additional security feature that blocks common hacking methods employed to gain access to modern vehicles, such as relay attacks keys range extending, relay attacks and ECU swapping. This is because the Ghost system communicates silently and doesn't emit any signals that could be detected by thieves using RF scanning or code grabbing technology.

The Ghost system also comes with the option of a Service/Valet mode that allows your vehicle to be temporarily re-started and driven without the requirement of PIN codes. This is great for those who park their car and only require it to be left for a short time, such as to open the garage door or place groceries in the boot. The system will end service mode based on speed and time or through the simple PIN code entry process and give you peace of mind that only YOU can utilize your vehicle!

Keyless Entry

Many customers are now seeking additional security measures due to the increasing trend of contactless car theft. This is particularly applicable to those who have put in time and money in customizing their car or own expensive cars. A supplementary immobiliser is an effective way to avoid this type of theft as it will stop your vehicle from starting unless the proper pin code is entered on your key fob.

Immobilisers are designed for different vehicle circuits, including ones which control starter motors and fuel pumps. They can also shut off the car alarm to attract attention and ward off potential thieves.

These devices communicate with the engine control unit (ECU) via the CAN data circuit. They also they stop the thief trying to get around it by installing a new ECU or using a key programmer. The immobilisers can be installed discretely inside your vehicle, leaving no trace and are completely undetectable by the tools that high-tech thieves employ.

As opposed to other systems that require a particular application, or a tag that is worn on the person carrying it, a ghost immobiliser liverpool immobiliser can only be deactivated by pressing a sequence of the existing electronic buttons on your steering wheel, door panel and centre console, allowing you to choose a custom pin sequence. The pin can be changed as often as you'd like, meaning it is as secure as a credit card. It can be more difficult to crack due to the fact that it requires up to 20 press.

Ghost also comes with a Valet/Service mode, which permits users to deactivate it when you plan to give your vehicle to valet parking or service. This allows the system to operate within the parameters, such as a 30-mph speed limit. It can then be reactivated using the original key or key that corresponds to the entry code.

Installed by our reputable installers and certified installers, it is the most secure and efficient aftermarket CAN-immobiliser available. It is also accepted by Thatcham for insurance purposes. The Ghost 2 immobiliser is also provided with six QR fingerprint labels, an ISR contact card containing your unique QR code as well as an emergency code that is secure that you keep in the wallet/purse of your car.